SAP Note 19565 - RPTDSH00

Symptom:

Various errors in RPTDSH00:

1. 1. The shift schedules displayed do not correspond to the date chosen on the initial screen.

2. 2. If you sometimes start the report using "Overview", and sometimes without "Overview", the day program display is different.

3. 3. There is a runtime error if you select a line which ought not to be selected.

4. 4. Only one shift (period work schedule) is ever selected. The error also occurs if you made the modifications described in this note before 13.02.1996. The note contained an error up until this date, but it has now been corrected. Please pay special attention to point 3 under
'Solution'.

Cause and prerequisites

Program error

Solution

These errors have been eliminated with correction number QKWK005503A for 2.1L, QKWK007627A for 2.2F and QKWK121374 for 3.0A.
You can carry out an advance correction.

1. Please insert the lines marked "<-- new" and deactivate the lines
marked "<-- deact.."

2. CAUTION! In the PARAMETERS part, there are two versions of the source
code: one for 2.1, the other for 2.2 and 3.0! Please modify the
parameters as shown below for the system in question.

3. Make especially sure that the command 'APERIOD = LPERIOD' stays active AFTER the command 'LOOP AT I508A' (Printout view page 4).

4. Please include the following numbered text:
Nr. Text
PE1 Month, Year from
PE2 Month, Year to

5. Then check report RPTDSH00 for errors.